* BIT SDS 25/64-6 Carbide
Estimated Availability Date:
Please Call for Special Orders : (403) 342-6030
For over 50 years, UCAN has specialized in producing and distributing concrete anchors and other fastening products. UCAN strives to provide the most practical and cost effective solutions to meet the needs of engineers, contractors, and tradesmen.
No customer reviews for the moment.
- Drill Bits: A metal rod of varying length and diameter that is used to drill holes in various materials and is designed to help draw the cut material out of the hole.
- Hammer Bits: A steel rod that has flutes down the length of the shaft with a carbide tip for cutting into masonry materials. The bit is heat-treated to provide strength so it can withstand the hammering action when used in hammer drills.
| * | The information provided for this product has been bulk uploaded for general information only, and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Please do not complete an order with this product unless you first confirmed by the vendor part number or the Red Deer Fasteners' product number. Any reliance on the material associated with this product is used at your own risk. |
| Vendor Part #: | SDS25646 |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
