Greenlee 1/2" to 2" Conduit - Bi-Metal Quick Change Hole Saw Kit
Faster slug removal - Ergonomic - Arbor allows for the rapid mounting / removal - Bi-metal hole saws for 1/2" to 2" conduit
1/2" to 2" Conduit - Bi-Metal Quick Change Hole Saw Kit
Faster slug removal - Ergonomic - Arbor allows for the rapid mounting / removal - Bi-metal hole saws for 1/2" to 2" conduit 
Product #: GRE830Q
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Please Call for Special Orders : (403) 342-6030
QTY: 
BUY DIRECT
Greenlee - a Textron Company, provides high quality tools for installing wire and cable.
No customer reviews for the moment.
Product Description
The Greenlee Bi-Metal Quick Change Hole Saw Kit provides much more than just rapid change-out of hole saws. You’ll have faster slug removal!
Greenlee has eliminated the bite of a saw crashing into steel.
You also benefit from better ergonomics as the saw reduces stress on wrist, arm, and hand.
There is only one arbor required from 7/8” to 6” (7/16" shank is recommended for hole saws above 2-1/2"). This new arbor also allows for the rapid mounting or removal of hole saws.
This kit is universal — it works with any brand hole saw, recessed light, and carbide grit hole saw products.
The kit also contains BI-METAL hole saws for 1/2" through 2" conduit sizes.
Equipped with this kit you'll be able to get the job done.
Greenlee has eliminated the bite of a saw crashing into steel.
You also benefit from better ergonomics as the saw reduces stress on wrist, arm, and hand.
There is only one arbor required from 7/8” to 6” (7/16" shank is recommended for hole saws above 2-1/2"). This new arbor also allows for the rapid mounting or removal of hole saws.
This kit is universal — it works with any brand hole saw, recessed light, and carbide grit hole saw products.
The kit also contains BI-METAL hole saws for 1/2" through 2" conduit sizes.
Equipped with this kit you'll be able to get the job done.
- Hole Saw: A hole saw (or hole cutter) is built with an annular (ring) shape, which allows the blade to cut (or bore) out a hole in the workpiece. It's usually used along with an arbor bit and powered by an corded or cordless drill.
Product Specifications
| Vendor Part #: | 830Q |
| Accessories: | Hole Saw Stops (826S) |
| Arbor Length: | [5-1/2 inches] |
| Includes: | Bi-Metal Hole Saw, Arbor Pilot Drill (37623), [4-1/8 inches] x [1/4 inch] |
| Replacement Parts: | 5/16" Arbor (02800), Minimum Chuck Size 3/8", 7/16" Arbor (02801), Minimum Chuck Size 1/2", Retrofit Kit (02802) - Upgrade 3 Hole Saws up to 1-9/16" into Quick Change, Small Adapters (02803) for 9/16" to 1-9/16" Saws Qty 10, Large Adapters (02804) for 1 |
- √Slug Removal
- √With Carbide Grit Hole Saws
- √With Recessed Light Hole Saws
- √With Standard Hole Saws
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.rdfasteners.com/cs_wiki/wiki/47-ingress-...
